B.2 Scanner Configuration File Format
The scanner configuration file format requirements differ for the following two cases. z For importing
z For exporting
| B.2.1 Scanner Configuration File Format (for Importing) |
| |
B | ||
This section describes the scanner configuration file format requirements for importing. | ||
|
zThe file charset should be the same as the value on the Central Admin Console, "Central Admin Server Settings" screen. The default charset is UNICODE
zThe file is in CSV format. The values for each item are as follows.
Item | Value and Format | Remarks |
|
|
|
Mac Address | XX:XX:XX:XX:XX | Optional |
| (X is an alphanumeric character) |
|
|
|
|
IP Address | xxx.xxx.xxx.xxx | Optional |
| (xxx is a value from 0 to 255) |
|
|
|
|
Subnet Mask | xxx.xxx.xxx.xxx | Optional |
| (xxx is a value from 0 to 255) |
|
|
|
|
Scanner Name | Up to 15 alphanumeric characters long | Required |
| (hyphens may also be used) |
|
|
|
|
Port Number | Numerical value from 1 to 65535 | Optional |
|
|
|
Use HTTPS? | 0: Do not use HTTPS (default) | Optional |
| 1: Use HTTPS |
|
|
|
|
Model | Up to 64 characters long | Optional |
|
|
|
Up to 32 characters long (*1) | Optional | |
|
|
|
Settings Group | Up to 32 characters long (*1) | Optional |
|
|
|
Comment | Up to 256 characters long | Optional |
|
|
|
System Updates | 0: Enable (default) | Optional |
| 1: Disable |
|
|
|
|
(*1): The following character strings cannot be used: (Default) (All) __default__ __all__ "__" is two underbars entered one after another.
| 489 | |
| ||
|
|
|