4.6 Using the System Settings Menus
1.Select the [System Settings] tab on the top menu.
2.Select the [Standby Mode] tab on the left side menu.
The "Standby Mode" screen appears.
4
3.Press the [List] button for the "Logout after" input field.
A list of "Logout after" times appears.
4.Select the desired time before automatic log out.
The default time is "5min".
5.Press the [List] button for the "Standby after" input field.
A list of "Standby after" times appears.
6.Select the desired time before standby mode.
The default time is "15min".
ATTENTION
If the [Never] button is selected for "Logout after", the selected time for "Standby after" is used as the wait time before switching to standby mode.
If a button other than [Never] is selected, set a "Standby after" time that is longer than the "Logout after" time.
7. Press the [OK] button.
The scanner is set to first standby and then automatically log out after the specified times.
| 67 | |
| ||
|
|
|