4.11 Setting Job Features

Press the [Name Format] button to specify a file name on the "File Names

HINT

(Common)" screen.

 

"Sub-folders" is enabled only when scanned data is saved to a folder.

4

For details about setting values, refer to "4.6.9 Setting a File Name Format

for When Saving Scanned Data" (page 72).

zCheck the Scan Count

When the number of sheets to be scanned for a job is fixed, set whether to check that the expected amount of sheets has been scanned.

z If [Yes] is selected

The number of scanned sheets is checked while a job is being processed.

z For "Expected Count", enter the expected number of sheets to be scanned, between 1 and 999.

ATTENTION

zIf a "Print" job item is included, the expected number of sheets to be scanned becomes 1 to 100.

zFor "Print", up to 100 pages can be scanned. For other than "Print", up to 999 pages can be scanned. For duplex scan- ning, make sure to set the number of pages so as not to exceed these respective maximums.

zSelect the [Allow per-Job adjustment] checkbox to make it possible to change the expected count of sheets to be scanned on the "Scan Count" screen, according to each job.

zSelect the [Confirm the Scan Count] checkbox to have the actual and expected sheet counts displayed on the "Scan Count" screen after scanning is complete.

zIf [No] is selected

The number of scanned sheets is not checked while a job is being processed.

fi-6010N Network Scanner Operator's Guide

 

187