4.7Using the Network Settings Menus
4.Select whether or not to enable SSL (Transport Layer Security).
Select the [On] button enables SSL. If SSL is enabled, press the [Regenerate] button to create another SSL Certificate. When a new SSL Certificate is created, the contents of the certificate are changed. The contents of the SSL Certificate are as follows.
zIssued by
Shows the SSL Certificate issuer.
zValid from
Shows the SSL Certificate expiration date. The expiration date is five years from the date on which the certificate was created. This is shown in date form.
Selecting the [Off] button disables SSL.
5. Press the [OK] button.
The communication settings are set.
zIf the Admin Network settings are changed using the Admin Tool, the
ATTENTION | Admin Tool is disconnected from the scanner. |
|
If any further actions are required, the Admin Tool will need to be reconnected to the scanner.
z If SSL is enabled, SSL is also used for communication between the 4 Central Admin Server and the scanner. When Central Admin is
enabled, change the settings on the Central Admin Console "Central Admin Server Settings" screen.
zThe following settings combinations are not possible. z Port Number "80" and SSL "On"
z Port Number "443" and SSL "Off"
| 89 | |
| ||
|
|
|