4.7.3 Setting a Central Admin Server

If "On" is selected for "Central Admin", scanners can be targeted for Central Admin.

1.Select the [Network Settings] tab on the top menu.

2.Select the [Central Admin Server] tab on the left side menu.

The "Central Admin Server" screen appears.

For Central Admin Console, Address and Port Number cannot be set.

3.Select whether or not to enable Central Admin Server.

The default setting is [Off].

For the Central Admin Console, the default value is [On] so that scanners for which Central Admin is enabled will become targets.

Select the [On] button to enable Central Admin Server.

Select the [Off] button to disable Central Admin Server. If [Off] is selected, no other settings can be entered. Press the [OK] button to set the selected contents.

HINT

If registration with the Central Admin Server is successful, the text will change to "This scanner's server-side status is: Registered".

Even when setting values are correct, if the network is disconnected or the Central Admin Server is in a suspended state, registration will fail. In either case, if the Central Admin Server is [On], the process will be run again the next time the scanner is turned on or resumed from the standby mode.

90