Screen

Message

Action

 

 

 

 

 

 

 

Print

Could not connect to the network

Try the following:

 

 

 

printer.

z Check that the LAN cable is

 

 

 

 

connected properly to the

 

 

 

 

scanner and print server.

 

 

 

 

z Contact a network administrator

 

 

 

 

to check that the print server is

 

 

 

 

working properly.

 

 

 

 

z Check that the print server

 

 

 

 

spooler is operating properly.

 

 

 

 

z Contact a network administrator

 

 

 

 

to find out if an access permit

 

 

 

 

has been set.

 

 

 

 

z Contact a system administrator

 

 

 

 

to check that the scanner IP

 

 

 

 

address and network printer

 

 

 

 

settings are correct.

 

 

 

 

"8.3 Network Connection

 

 

 

 

Troubleshooting" (page 456)

 

 

 

 

 

 

 

 

Error: network printer could not be

Contact a network administrator to

 

 

 

accessed.

check whether the network printer

 

 

 

E

 

 

can be accessed.

 

 

 

 

 

 

Invalid No. of copies. Enter a value

Enter a valid No. of copies.

 

 

between 1 and 99, and try again.

Only numbers 1 to 99 can be used.

 

 

 

 

 

 

 

 

 

Print Server

User name is required.

Enter a user name.

 

 

Authentication

 

 

 

 

Network is busy. Try again later.

Wait for a while, and try again.

 

 

 

 

 

 

 

 

 

 

 

User name or password may be

Re-enter the user name and

 

 

 

incorrect.

password.

 

 

 

 

 

 

 

 

Cannot find the network printer path.

Try the following:

 

 

 

 

z Contact a server administrator.

 

 

 

 

z Check that the spooler is

 

 

 

 

operating properly.

 

 

 

 

 

 

 

fi-6010N Network Scanner Operator's Guide

 

537