6.14 Processing a Job
6.14.2 Changing a File Name (forWhen a job is processed, file names to be used when saving or attaching scanned data to an
HINT
It is not possible to change a file name when the "File Name" screen is set not to be shown.
1.Press a job button on the "Job Menu" screen.
2.On the "File Name" screen, enter the file name for the scanned data to be saved or sent by
File names may be up to 128 characters long. \ and / are used as folder separator characters.
The following symbols cannot be used. : * ? " < >
The default value is the file name specified in the "Common File Name" input field on the "Job Details" window. For details, refer to "4.11.2 Setting a Job Sequence" (page 185).
6
HINT
zWhen sequence numbers are set to be appended to file names, a sequence number is appended to the end of the default file name. The guidance message "A sequence number will be appended to the file name." is shown on the screen.
zA sequence number will not be appended to a file name that has been edited.
zAfter entering the file name, press the [Scan] button to start the scan. If any further job setup steps are required, press the [OK] button that appears instead.
| 419 | |
| ||
|
|
|