4.7Using the Network Settings Menus
4.7.1 Giving the Scanner an IP AddressAn IP address must be set in order to connect the scanner to a network.
1.Select the [Network Settings] tab on the top menu.
2.Select the [IP Address] tab on the left side menu.
The DHCP or IP address setting screen appears.
3. Select whether or not a DHCP is required.
Set the scanner's IP address. This may be done automatically, by pressing the DHCP [On] button. By default, this is set as [On].
The IP address may also be set manually, by pressing the DHCP [Off] button and entering the following numerical addresses:
zIP Address
zSubnet Mask
zDefault Gateway
86