■ Error

Code

Message

Action

 

 

 

7B020001

Scanner registration by Central Admin

z For Central Admin Server

 

server failed.

Check that the scanner is

 

 

registered on the Central Admin

 

 

Console "Scanner List" screen.

 

 

z For Scanner

 

 

Enter the address of the Central

 

 

Admin Server on the "Ping"

 

 

screen on the [Network

 

 

Settings] tab, and check

 

 

whether or not there is a

 

 

response from the Central

 

 

Admin Server.

 

 

If there is no response from the

 

 

Central Admin Server, check

 

 

whether or not DHCP is enabled

 

 

on the "IP Address" screen on

 

 

the [Network Settings] tab.

 

 

If DHCP is disabled, check that

 

 

the IP Address, Subnet Mask,

 

 

Default Gateway settings are

 

 

correct.

 

 

Check also that the network

 

 

between the scanner and the

 

 

Central Admin Server is

 

 

connected correctly.

 

 

Also check that the scanner's

 

 

server-side status is

 

 

"Registered" on the "Central

 

 

Admin Server" screen on the

 

 

[Network Settings] tab.

 

 

If the scanner's server-side

 

 

status is "Unregistered", check

 

 

the address and the port number

 

 

of the Central Admin Server,

 

 

and register the scanner on the

 

 

Central Admin Server.

 

 

 

590