zIf error occurs
If an error occurs while an item in the job sequence is being performed, set whether or not to continue with unfinished items before ending a job.
z If [Proceed to next Job Item] is selected
If an error occurs while an item in the job sequence is being performed, job processing proceeds to the next item in the sequence and completes all unfinished items before ending a job.
z If [Terminate the Job] is selected
If an error occurs while an item in the job sequence is being performed, job processing ends without completing any unfinished items.
zWhen Job finishes
Set whether to notify of a completion when all operations of a job finish successfully. z If [Pause on Job Progress screen] is selected
When the job finishes successfully, the "Job Progress" screen is shown to notify that the job is completed.
z If [Close the Job Progress screen] is selected
Returns to the Job Menu when the job finishes successfully.
5.Select the [
] button to the left of [Scan Settings].
Set the desired scan options, such as Carrier Sheet, color mode, and paper size. For details about setting values, refer to "6.9 Setting the Scan Options" (page 365).
188