DSM250 User’s Manual
Figure 125 – Restoring Factory Defaults on the GPS200
6.15.2Cold Start GPS
The DSM250 is capable of restarting the GPS algorithm on a Maretron GPS200. You can choose this setting by pressing the Enter key ( 
) with the “Cold start GPS Engine” menu item selected which causes the screen shown in Figure 119 to be displayed. This will cause the GPS200 to discard all position and satellite data and compute a position fix.
Figure 126 – Performing a Cold Start of the GPS200
6.15.3Device Label
A label may be assigned to the GPS200 as an aid to identifying the device over the network. Typically this would describe the location of the GPS on the vessel.
See section 3.3.4 for details on how to enter a textual value.
6.15.4SBAS (WAAS,EGNOS,MSAS) Enable/Disable
The DSM250 is capable of enabling or disabling the SBAS (WAAS) function on a Maretron GPS Antenna/Receiver (GPS200). You can change this setting by pressing the Enter key ( 
) with the “SBAS: WAAS,EGNOS,MSAS:” menu item selected which causes the screen shown in Figure 121 to be displayed.
Page 126 | Revision 1.4.16a |
