®

6.12.4.1Channel #0 (Differential Mode)

This section describes the Channel #0 configuration parameters when the FFM100’s operating mode has been set to “Differential”.The Channel #0 (Differential Mode) menu is too large to fit on a single screen, so it is shown in two separate screenshots below.

Figure 91 – FFM100 Channel #0 First Configuration Screen (Differential Mode)

Figure 92 – FFM100 Channel #0 Second Configuration Screen (Differential Mode)

6.12.4.1.1Channel Supply/Return

You may select whether the Channel #0 fuel flow sensor is connected to the supply fuel line or the return fuel line.

6.12.4.1.2Engine Instance

Program this parameter to match the desired engine instance number of the flow rate and total fuel used for this channel. You can program this parameter to any value between 0 and 252.

Revision 1.4.16a

Page 99

Page 115
Image 115
Maretron DSM250-01 user manual Channel #0 Differential Mode, 12.4.1.1Channel Supply/Return, 12.4.1.2Engine Instance