Maretron DSM250-01 user manual Selection of an Individual Switch/Breaker

®

The maximum number of switches/breakers you can have on a single screen is 16 (the “4 Quarters” format, with all four windows set to use the “4 rows” or “2 rows, 2 column” switch/breaker configurations.

In order to configure the individual switch/breaker controls, press the “Enter” key with the selected type highlighted to display a menu with entries for each switch/breaker in the window being configured, as shown in ? below.

Figure 250 – Selection of an Individual Switch/Breaker

Figure 251 below shows the configuration menu for each individual switch/breaker.

Figure 251 – Configuration of an Individual Switch/Breaker

Each switch/breaker has several configurable parameters:

•Color-Off – select the color to be displayed when the controlled load is in the OFF state. The default color is gray.

•Color-On – select the color to be displayed when the controlled load is in the ON state. The default color is green.

Revision 1.4.16a Page 209