DSM250 User’s Manual
6.19.1.3NMEA2000 PGN Enable/Disable
The RAA100 Rudder Angle Adapter transmits the NMEA2000 PGN #127245 which can be turned on or turned off by the DSM250 display. Pressing the Enter key with “NMEA2000 PGN Enable/Disable…” menu item selected causes the DSM250 to display the following screen (Figure 144).
Figure 144 – RAA100 NMEA 2000® PGN Enable/Disable Screen
You can enable or disable the transmission of the Rudder message by pressing the Enter key on the message to be configured. Options are:
•Disable – The status message will not be transmitted
•Default – The status message will be transmitted at its default NMEA2000 rate.
Select the required option using the Scroll Up and Scroll Down keys followed by the Enter key.
6.19.1.4Restore Factory Defaults
This option restores all settings on the device to their factory default state.
6.19.2Label
A label may be assigned to the RAA100 as an aid to identifying the device over the network. Typically this label will describe the rudder to which the RAA100 is connected (e.g. Port Rudder).
Page 140 | Revision 1.4.16a |
