DSM250 User’s Manual
Figure 189 – Intermediate Level Calibration
Once the tank is completely full, instead of pressing the Accept key to store the current calibration point, press the Complete key. This will complete the calibration process and will also adjust the tank capacity to the currently indicated level. Figure 190 below shows the calibration screen at the last point with the full tank level (and thus the tank capacity) set to 101 gallons.
Figure 190 – Full Level Calibration
After you press accept, a confirmation screen will appear showing completion of the calibration process and the new tank capacity value. A screenshot of this calibration screen is shown below in Figure 191.
Page 170 | Revision 1.4.16a |