®

6.12.4.2.10 Fluid Type

Program this parameter to match the type of fluid whose flow is being monitored.

6.12.4.2.11 Flow Instance

Program this parameter to match the desired instance number of the fluid flow reading for this channel. You can program this parameter to any value between 0 and 252. The default value for this parameter is 0.

6.12.4.2.12 Flow Label

Program this parameter with a text string which identifies the particular fluid flow parameter being monitored by this channel. Maretron display products will display this label text when you are selecting data to display.

6.12.4.2.13 Volume Instance

Program this parameter to match the desired instance number of the volume reading for this channel. You can program this parameter to any value between 0 and 252. The default value for this parameter is 0.

6.12.4.2.14 Volume Label

Program this parameter with a text string which identifies the particular volume parameter being monitored by this channel. Maretron display products will display this label text when you are selecting data to display.

6.12.5Channel #1…

This submenu contains configuration parameters for Channel #1. This menu looks different depending on whether the FFM100’s operating mode has been set to “Differential” or “Two Independent Sensors”.

6.12.5.1Channel #1 (Differential Mode)

This section describes the Channel #1 configuration parameters when the FFM100’s operating mode has been set to “Differential”.

Revision 1.4.16a

Page 103

Page 119
Image 119
Maretron DSM250-01 user manual Channel #1…, Fluid Type, Channel #1 Differential Mode