Maretron DSM250-01 user manual Vdr

DSM250 User’s Manual

	4.2.23		Time	19
	4.2.24		Transmission	20
	4.2.25		VDR	20
	4.2.26		Vessel	20
	4.2.27		Wind	20
	4.3	Alerts		22
	4.3.1		Alert Types	22
	4.3.2		Alert Terminology	22
	4.3.3		Alert Priority	22
	4.3.4		Vessel Alert Operating Modes	22
	4.3.5		Alert States	23
	4.3.6		Available Alert Classes	24
5	Operating Modes			25
	5.1	Favorite screens modes		25
	5.2	Menu Mode		26
	5.2.1		Alert Setup Menu	27
	5.2.2		Alert Status	27
	5.2.3		Configuration Menu	27
	5.2.4		Display Settings Menu	29
	5.2.5		Favorite Screens Mode	36
	5.2.6		Favorite Screens Setup Menu	36
	5.2.7		Units Menu	40
6	Device Configuration			44
	6.1	Airmar Depth/Speed/Temperature Transducers		47
	6.1.1		Advanced Configuration	47
	6.1.2		Device Instance	48
	6.1.3		Installation Description	48
	6.1.4		NMEA2000 PGN Enable/Disable	48
	6.1.5		Clear Speed Calibration	48
	6.1.6		Speed Calibration	49
	6.1.7		Clear Temperature Offset	49
	6.1.8		Temperature Calibration	50
	6.1.9		Transducer Depth Offset	50
	6.1.10		Trip Log	51
	6.2 Bennett EP-30 (NMEA1) Trim Tabs Configuration			52
	6.2.1		Trim Tabs Calibration	52
	6.3	Maretron ACM100 Configuration		54
	6.3.1		Advanced Configuration	54
	6.3.2		AC Circuit Type	57
	6.3.3		AC Device Type	57
	6.3.4		Device Instance	57
	6.3.5		Label	57
	6.3.6		Reset Total Energy Recorded	58
	6.4	Maretron ALM100 Configuration		59
	6.4.1		Advanced Configuration	59
	6.4.2		Instance	60
	6.4.3		Label	60
	6.4.4		Test Annunciator	61

Page iv Revision 1.4.16a