DSM250 User’s Manual
6.3Maretron ACM100 Configuration
This describes the configuration of the Maretron ACM100 firmware version 1.0.6.
Figure 43 – ACM100 Configuration Screen
6.3.1 Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be performed by an advanced user. Typically advanced configuration is only done at installation and should not need to be done while at sea.
Figure 44 – ACM100 Advanced Configuration Screen
6.3.1.1 Current Transformer A
The ACM100 with firmware revision 1.0.7 or newer supports two different types of current sensors: the 100A current sensor included with the unit and an optional 400A current sensor. This menu entry allows you to indicate which type of current sensor you have installed for phase A.
Page 54 | Revision 1.4.16a |
