®
After you press the Accept ( 
) key, a screen, shown in Figure 41 below, appears, instructing you to now lower both trim tabs to the full down position. It is important that you do this without stopping in order for the calibration process to succeed.
Figure 41 – EP-30 Intermediate Calibration Screen
After you have lowered both trim tabs to their full down position and a few seconds have elapsed, the screen shown in Figure 42 below should appear, indicating that the calibration of the trim tab sensors has completed successfully. You may now press any key to return to the previous menu.
Figure 42 – EP-30 Calibration Success Message
Revision 1.4.16a | Page 53 |
