DSM250 User’s Manual
6.10 Maretron DST110 Configuration
The DSM250 is capable of configuring Maretron’s DST110 for several different parameters including trip log resetting, transducer depth offset, temperature calibration, and speed calibration.
Figure 80 – DST110 Configuration Screen
6.10.1Advanced Configuration
Advanced Configuration changes some complex parameters within the device, and should only be performed by an advanced user. Typically advanced configuration is only done at installation and should not need to be done while at sea.
Figure 81 – DST110 Advanced Configuration Screen
6.10.1.1Device Instance
This entry allows you to program the NMEA 2000 device instance for the unit. You usually will not need to modify the default value of “0” unless you have multiple units on the network.
Page 86 | Revision 1.4.16a |
