Darkness

Enter the percentage of shading for the watermark text. The shading can be set from 0 (lightest) to 100 (darkest) in units of 1%. You can also set the percentage of shading by moving the scroll bar.

Angle

Enter the degree of angle for rotating the watermark text. The angle can be set from -180 to 180 degrees in units of 1 degree. You can also set the degree of angle by moving the scroll bar.

[Save]

Click on this to save the new or edited watermark.

[Cancel]

Click on this to cancel creating a new watermark or editing a watermark and restores the previous screen values.

2Watermark Image

The image of the new or edited watermark is displayed. You can also adjust the position of the watermark by moving the horizontal and vertical scroll bars.

3Position

This permits setting the position of the watermark using numeric values.

X Offset

Enter the horizontal position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to 254.00 mm in units of 0.01 mm).

Y Offset

Enter the vertical position of the watermark. It can be set from -10.00 to 10.00 inch in units of 0.01 inch (-254.00 to 254.00 mm in units of 0.01 mm).

[Center]

Click on this to center the watermark.

108

Page 110
Image 110
Toshiba 810 manual 108