34

 

:

The PS3 Upgrade (GE-1020) or PS3 Scan & HDD Upgrade (GE-1060+GE-1110) is required to

 

 

use the PostScript Driver.

 

 

 

7

Click on [Add Port...].

• The Printer Ports dialog box appears.

8

Select “LPR Port” and click on [New Port...].

• When “LPR Port” is not listed, make sure the TCP/IP

Printing Service is installed on your Windows NT 4.0. “LPR Port” is not listed unless the TCP/IP Printing Service is installed.

• The Add LPR compatible printer dialog box appears.

9 Enter the IP address of the GA-1140 printer in the “Name or address of server providing lpd” field and a queue name in the “Name of printer or print queue on that server” field, and click on [OK].

When your network uses DNS or WINS server, enter the printer name of the GA-1140 provided from DNS or WINS in the “Name or address of server providing lpd” field.

In the “Name of printer or print queue on that server” field, you have to enter a queue name, direct, hold, or print, on the GA-1140 printer. Enter a queue depending on how you want to print.

direct - print jobs are sent straight to the printer without spooling.

hold - print jobs are held until users operate copying or moving them to the Print queue with the job management tools.

print - print jobs are spooled to the hard disk in the GA-1140 printer and printed out. Use this queue for general printing.

Page 36
Image 36
Toshiba 810 manual Click on Add Port, Select LPR Port and click on New Port