Agilent Technologies 1680 Set the reporting level, Select the tests you want to run 5 Click Start

Chapter 3: Testing Performance

To set up the test equipment and the logic analyzer

2In the Analysis System Self Tests dialog, select the self test options:

•Include interactive tests — causes interactive tests to appear in the selection lists.

•Run repetitively — runs the selected tests repetitively until you click Stop.

•Stop on fail — if you are running multiple tests or running tests repetitively, this causes the tests to stop if there is a failure.

•Double-click item to start — lets you double-click a test to start it.

3Set the reporting level.

Higher levels produce increasingly verbose output.

4Select the tests you want to run.

5Click Start.

As the tests are running, the results are reported in the lower part of the dialog and saved to a log file.

26