Agilent Technologies 1680 To test the multiple-clock state acquisition, Set up the equipment

Chapter 3: Testing Performance

To test the multiple-clock state acquisition

To test the multiple-clock state acquisition

Testing the multiple-clock, state acquisition verifies the performance of the following specifications:

•Minimum master-to-master clock time.

•Maximum state acquisition speed.

•Setup/Hold time for multiple-clock, state acquisition.

This test checks two combinations of data using multiple clocks at two selected setup/hold times.

Equipment Required

Equipment	Critical Specifications	Recommended Model/Part
Pulse Generator	200 MHz 3.0 ns pulse width,	8133A option 003
	< 600 ps rise time
Digitizing Oscilloscope	≥ 6 GHz bandwidth, < 58 ps rise time	54750A w/ 54751A
Adapter	SMA(m)-BNC(f)	1250-1200
SMA Coax Cable (Qty 3)	18 GHz bandwidth	8120-4948
Coupler	BNC(m)(m)	1250-0216
BNC Test Connector,
6x2 (Qty 4)

Set up the equipment

1If you have not already done so, do the following procedures:

“To set up the test equipment and the logic analyzer” on page 23. “To set up the logic analyzer for the state mode tests” on page 33.

2Increase the pulse generator channel 2 width to 3.000 ns.

48