Agilent Technologies 1680, 1690 manual Replaceable Parts, Ref. Des, Description

Chapter 7: Replaceable Parts

Replaceable Parts

Ref. Des.	Agilent Part Number	QTY	Description
E3	5090-4833	6	Grabber Kit Assembly (1681A, AD)
E3	5090-4833	4	Grabber Kit Assembly (1682A, AD)
E3	5090-4833	2	Grabber Kit Assembly (1683A, AD)
E4	5959-9333	0	Replacement Probe Leads (Qty 5)
E5	5959-9335	0	Replacement Pod Grounds - 5” (Qty 2)
E6	5959-9334	8	Probe Grounds - 2” (Qty 5, 1680A, AD)
E6	5959-9334	6	Probe Grounds - 2” (Qty 5, 1681A, AD)
E6	5959-9334	4	Probe Grounds - 2” (Qty 5, 1682A, AD)
E6	5959-9334	2	Probe Grounds - 2” (Qty 5, 1683A, AD)
H1	0380-1927	6	Hex Standoff 0.185 in (I/O panel to motherboard
			ports)
H2	0515-0365	3	M2.0 x 0.40; 4 mm T6 PH (CD-ROM drive to CD-
			ROM drive bracket)
H3	0515-0372	40	M3.0 x 0.50; 8 mm T10 PH (I/O panel to chassis,
			module cover to chassis, CD-ROM top bracket to
			CD-ROM bottom bracket, distribution board to
			chassis, probe shroud to acquisition board,
			acquisition board to chassis, probe shroud to
			chassis, PCI board and ISA slot covers to chassis,
			CD-ROM drive assembly to chassis, sleeve to
			chassis)
H4	0515-0433	12	M4.0 x 0.70; 8 mm T20 PH (power supply to
			chassis, cable tray to sleeve, rear feet to chassis)
H5	0515-1403	8	M4.0 x 0.70; 6 mm T15 90° FH (snap to sleeve
			(accessory pouch), front panel assembly to chassis)
H6	0515-1934	2	M2.5 x 0.45; 6 mm T8 PH (inverter to chassis)
H7	0515-1974	2	M2.5 x 0.45; 4 mm T8 PH (flexible disk drive to
			chassis)
H8	0515-2306	5	M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
			shroud, 1680A, AD)
H8	0515-2306	4	M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
			shroud, 1681A, AD)
H8	0515-2306	3	M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
			shroud, 1682A, AD)
H8	0515-2306	2	M3.0 x 0.5; 10 mm T10 PH (probe cable to probe
			shroud, 1680A, AD)
H9	2360-0452	4	6-32 0.250 in T15 PH with washer (hard disk drive
			to chassis)
H10	2950-0054	2	Hex Nut 0.625 x 0.125; 1/2-28 (acquisition board
			BNC connectors to probe shroud)

148