Agilent Technologies 1680, 1690 Contents, To test the threshold accuracy, Performance Test Record

Contents

To test the threshold accuracy				28
Set up the equipment	28
Connect and configure the logic analyzer					29
Test the ECL Threshold		30
Test the 0 V User Threshold			31
Test the next pod 32
To set up the logic analyzer for the state mode tests						33
To test the single-clock,single-edge, state acquisition						37
Set up the equipment	37
Connect and configure the logic analyzer					37
Verify the test signal	40
Check the setup/hold combination				41
Test the next channels (1680/81A,AD and 1690/91A,AD)						47
To test the multiple-clock state acquisition 48
Set up the equipment	48
Connect and configure the logic analyzer					49
Verify the test signal	51
Check the setup/hold with single clock edges, multiple clocks							52
Test the next channels (1680/81A, AD and 1690/91A, AD)						56
To test the single-clock,multiple-edge, state acquisition							57
Set up the equipment	57
Connect and configure the logic analyzer					58
Verify the test signal	60
Check the setup/hold with single clock, multiple clock edges							61
Test the next channels (1680/81A,AD and 1690/91A,AD)						65
To test the time interval accuracy 66
Set up the equipment	66
Connect and configure the logic analyzer					67
Acquire and verify the test data 69
Performance Test Record			71
4 Calibrating and Adjusting
Logic analyzer calibration		76

6