Chapter 5: Troubleshooting
Troubleshooting the Agilent
Device Manager
Use Device Manager to see if the Agilent Logic Analyzer device has been properly installed. The Device Manager should include an entry "Logic Analyzers" with the device "Agilent Technologies 1680/1690 Series Analyzer".
If the logic analyzer device is not listed, then uninstall and reinstall the Agilent Logic Analyzer application software. If the device still does not appear, then there is a problem with the Windows XP Professional operating system. Consult the documentation for the operating system to determine why the device is not being installed and run.
To test the power supply voltages
Refer to chapter 6, "Replacing Assemblies," for instructions to remove or replace covers and assemblies.
This procedure will not expose any problems related to load regulation; however, it will show most failure modes to over 95% confidence,
WARNING:Hazardous voltages exist on the power supply. This procedure is to be performed by
1Close the Agilent Logic Analyzer application and all other applications running on the logic analyzer.
2Shut down the instrument.
