Chapter 9 Removing and Installing the NPE or NSE

Removing and Replacing the NPE or NSE

Figure 9-9 Opening DIMM Socket Latches

12

1

Release latches

2

SDRAM DIMM

 

 

 

 

66412

Note The SDRAM DIMM sockets on the NPE-175, NPE-225, and NPE-300 are parallel to the circuit board. They are not tilted at an angle.

Step 5 With the DIMM socket latches open, grasp the ends of the DIMM between your thumbs and forefingers and pull the DIMM completely out of the socket. (See Figure 9-10.)

Figure 9-10 Removing the DIMM

12

66414

1

Notch

2

Metal fingers

Handle the edges of the DIMM only; avoid touching the memory modules, pin or traces (the metal fingers on the connector side of the DIMM). (See Figure 9-11.)

Network Processing Engine and Network Services Engine Installation and Configuration

 

OL-4448-12

9-15

 

 

 

Page 185
Image 185
Cisco Systems NPE-175, NPE-225 manual Release latches, Sdram Dimm