Cisco Systems NPE-225, NPE-175 manual Using the show ip interface Command

Contents

	Installing an SFP Module—NPE-G2			7-20
	Installing a GBIC—NPE-G1		7-23
	Replacing the DIMM on the NPE-G2			7-24
	Upgrading the SDRAM SODIMMs on the NPE-G1 (Optional)						7-26
	Removing a SODIMM		7-26
	Installing a SDRAM SODIMM			7-27
	Inserting the NPE-G1 or NPE-G2 into the Router					7-28
	Attaching the Rear Cable-Management Brackets and Cables (Optional)								7-29
	Installing the NPE-G1 or NPE-G2Cable-Management Brackets							7-29
	Installing the Rear Cable-Management Brackets on a Front-Mounted Router (Optional)									7-31
	Installing the Rear Cable-Management Brackets on a Rear-Mounted Router (Optional)									7-32
	Installing the Default Cable-Management Bracket on a Cisco uBR7246VXR Router
	(Optional)	7-34
	Reconnecting Input Power and Powering Up the Router 7-35
	Reconnecting AC-Input Power to the Cisco 7200 VXR Router							7-35
	Reconnecting AC-Input Power to the Cisco uBR7246VXR Router								7-37
	Reconnecting AC-Input Power to the Cisco uBR7225VXR Router								7-38
	Reconnecting DC-Input Power to the Cisco 7200 VXR Router							7-38
	Reconnecting DC-Input Power to a Cisco uBR7246VXR Router							7-41
	Powering Up the Router		7-45
	Enabling the Second Processor on the NPE-G1				7-46
	Error Messages	7-47
	Using show Commands Associated with the mpf Command						7-47
	Using the show interface stats Command					7-48
	Using the show ip interface Command 7-48
	Using the show mpf cpu Command				7-49
	Using the show mpf cpu history Command					7-49
	Using the show mpf interface Command					7-50
	Using the show mpf ip exact-route Command 7-51
	Using the show mpf punt Command				7-51
	Using the show version Command				7-51
	Copying the Saved Configuration to NVRAM				7-52
	Copying the Saved Configuration File from a Flash Disk or PC Card							7-53
	Copying the Saved Configuration File from the CompactFlash Disk							7-53
	Downloading the Saved Configuration from the TFTP Server						7-54
	Auxiliary and Console Port Information			7-56
	Configuring an Auxiliary Port to Receive Console Port Messages							7-56
	Configuring the Native Gigabit Ethernet Interfaces					7-56
	Changing the Media Type of the Native Gigabit Ethernet GBIC, SFP,
	or RJ-45 Ports	7-56
	Network Processing Engine and Network Services Engine Installation and Configuration
vi									OL-4448-12