Chapter 10 Configuration Tasks and Troubleshooting Information
Using the show pxf interface Command
The show pxf interface command provides a summary of the interfaces in the router and which PXF features or capabilities are enabled on these interfaces. The following is an example of the
show pxf interface command:
Router# | show pxf interface | |
Intf | I/f # | Attributes |
Fa0/0 | 3 | Raw, Encap, QoS(Cr 0, Thrsh 2, Max 101) |
Et1/0 | 4 | Raw, Encap |
Et1/1 | 5 | Raw, Encap, QoS(Cr 0, Thrsh 2, Max 13) |
Et1/2 | 6 | Raw, Encap |
Et1/3 | 7 | Raw, Encap |
Se2/0 | 8 | Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5) |
Se2/1 | 9 | Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5) |
Se2/2 | 10 | Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5) |
Se2/3 | 11 | Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5) |
Fa3/0 | 12 | Raw, Encap |
PO4/0 | 13 | Raw, Encap |
AT5/0 | 14 | Raw, Encap |
Using the show pxf feature ? Command and Subcommands
The following is an example of the
Router# show pxf feature ?
cef PXF CEF info nat PXF NAT info
•show pxf feature cef ?
display pxf entry
Router# show pxf feature cef entry Shadow
41 leaves, 1968 leaf bytes, 15 nodes, 267000 node bytes
5invalidations
46prefix updates
refcounts: 66746 leaf, 66720 node
Prefix/Length | Refcount | Parent |
0.0.0.0/0 | 62282 |
|
0.0.0.0/32 | 3 | 0.0.0.0/0 |
171.69.12.128/27 | 34 | 0.0.0.0/0 |
171.69.12.128/32 | 3 | 171.69.12.128/27 |
171.69.12.129/32 | 3 | 171.69.12.128/27 |
171.69.12.130/32 | 3 | 171.69.12.128/27 |
171.69.12.131/32 | 3 | 171.69.12.128/27 |
171.69.12.132/32 | 3 | 171.69.12.128/27 |
171.69.12.138/32 | 3 | 171.69.12.128/27 |
171.69.12.139/32 | 3 | 171.69.12.128/27 |
171.69.12.140/32 | 3 | 171.69.12.128/27 |
171.69.12.141/32 | 3 | 171.69.12.128/27 |
171.69.12.142/32 | 3 | 171.69.12.128/27 |
171.69.12.143/32 | 3 | 171.69.12.128/27 |
171.69.12.145/32 | 3 | 171.69.12.128/27 |
171.69.12.146/32 | 3 | 171.69.12.128/27 |
171.69.12.147/32 | 3 | 171.69.12.128/27 |
(display text omitted)
Network Processing Engine and Network Services Engine Installation and Configuration
|
|
| |
|
|
