
Chapter 4 Retrofitting Options
To Retrofit A5 DC Power Input Assembly (Option 002)
4
To Retrofit A5 DC Power Input Assembly (Option 002)
Option 002 DC Power Input Assembly Parts
|
| Item | HP Part No. | Qty. |
| • | Chassis (MP10) | 1 | |
| • A5 DC Power Input Assembly | 1 | ||
| • A4 AC Power Supply Assembly | 1 | ||
| • | Rear label (MP11) | 1 | |
| • TORX 10 screws (H2) | 4 | ||
|
| |||
NOTE | Option 002 can NOT be installed or combined with Option 060 Rear | |||
| Terminals. |
|
| |
Preliminary Procedure
1Remove the cover.
See the section titled “To Remove the Cover” in Chapter 3 of this guide.
2Remove the front bezel.
See the section titled “To Remove the Front Bezel” in Chapter 3 of this guide.
3Remove the existing A4 AC Power Supply Assembly.
4Remove A1 Motherboard Assembly from chassis MP1.
See the section titled “To Remove A1 Motherboard Assembly” in Chapter 3 of this guide.