
7
Chapter 7 HP 53131A/132A Specifications
Measurement Specifications (Continued)
Measurement Specifications (Continued)
Pulse Width
Measurement is specified over the full signal range of Channel 1. The width of the opposing pulse must be greater than 4 ns (e.g., when measuring the positive pulse width, the negative pulse width must be greater than 4 ns).
Pulse Selection: | Positive or Negative |
|
Trigger: | Default setting is Auto Trigger8 at 50% | |
Results Range: | 5 ns to 105 s |
|
LSD: | 53131A | 53132A |
| 500 ps | 150 ps |
RMS Resolution: | tre2 s + Start Trigger Error2 + Stop Trigger Error2 | |
tres | 53131A | 53132A |
750 ps | 300 ps | |
Systematic Uncertainty:
±(Time Base Error × Pulse Width) ± Trigger Level Timing Error ±1.5 ns Differential Channel Error (HP 53131A)
±900 ps Differential Channel Error (HP 53132A)
Rise/Fall Time
Measurement is specified over the full signal ranges of Channel 1. The interval between the end of one edge and start of a similar edge must be greater than 4 ns. (e.g., when measuring a rising edge, 4 ns must elapse between the 90% point of one rising edge and the 10% point of the next rising edge).
Edge Selection: | Positive or Negative |
|
Trigger: | Default setting is Auto Trigger8 at 10% and 90% | |
Results Range: | 5 ns to 105 s |
|
LSD: | 53131A | 53132A |
| 500 ps | 150 ps |
RMS Resolution: | tre2 s + Start Trigger Error2 + Stop Trigger Error2 | |
tres | 53131A | 53132A |
750 ps | 300 ps | |
Systematic Uncertainty:
±(Time Base Error × Transition Time) ± Trigger Level Timing Error ±1.5 ns Differential Channel Error (HP 53131A)
±900 ps Differential Channel Error (HP 53132A)
Phase
Measurement is specified over the full signal range of Channels 1 and 2.
Results Range: |
|
|
|
|
| |
| 2 | 2 |
| ⎛ | ⎛ Phase⎞ | 2⎞ |
RMS Resolution: | (tres + (2 × Trigger Error |
| )) × | ⎝1 + | ⎝ | ⎠ × Frequency × 360° |
tres | 53131A |
| 53132A |
|
| |
|
| |||||
750 ps |
| 300 ps |
|
| ||
Systematic Uncertainty: | (± Trigger Level Timing Error ± 1.5 ns Differential Channel Error) × Frequency (HP 53131A) | |||||
| (± Trigger Level Timing Error ± 900 ps Differential Channel Error) × Frequency (HP 53132A) | |||||
8Restrictions noted on page