Tab or section

Options

 

 

 

● Edit Other Links: Allows you to add or customize a link to another Web site. This

 

link is displayed in the Other Links area on all embedded Web server pages.

 

● Device Information: Allows you to name the printer and assign an asset number

 

to it. Enter the name and e-mail address for the primary contact who will receive

 

information about the printer.

 

● Language: Allows you to determine the language in which to display the

 

embedded Web server information.

●

●

Date & Time: Allows time synchronization with a network time server.

Wake Time: Allows you to set or edit a wake time for the printer.

NOTE The Settings tab can be password-protected. If this printer is on a network, always consult with the printer administrator before changing settings on this tab.

Networking tab

Provides the ability to change network settings from your computer

Network administrators can use this tab to control network-related settings for the printer when it is connected to an IP-based network. This tab does not appear if the printer is directly connected to a computer, or if the printer is connected to a network using anything other than an HP Jetdirect print server.

NOTE The Networking tab can be password-protected.

Other links

Contains links that connect you to the Internet

●HP Instant Support™: Connects you to the HP Web site to help you find solutions. This service analyzes your printer error log and configuration information to provide diagnostic and support information specific to your printer.

●Order Supplies: Connects to the HP Web site, in which you can order genuine HP supplies, such as print cartridges and paper.

●Product Support: Connects to the support site for the printer, from which you can search for help regarding general topics.

NOTE You must have Internet access in order to use any of these links. If you use a dial-up connection and did not connect when you first opened the embedded Web server, you must connect before you can visit these Web sites. Connecting might require that you close the embedded Web server and reopen it.

ENWW

Using the embedded Web server 101