3.Slide the media-width guides slightly wider than the media.

4.Place media into the tray (short-edge in, print-side up). The media should be centered between the media-width guides and under the tabs on the media-width guides.

5.Slide the media-width guides inward until they lightly touch the media stack on both sides without bending it. Make sure that the media fits under the tabs on the media-width guides.

NOTE Do not add media to tray 1 while the printer is printing. This could cause a jam. Do not close the front door when the printer is printing.

64 Chapter 4 Printing tasks

ENWW