Item

Values

 

 

 

ON

CARTRIDGE LOW

STOP

 

CONTINUE

CARTRIDGE OUT

STOP

 

CONTINUE

JAM RECOVERY

AUTO

 

OFF

 

ON

RAM DISK

AUTO

 

OFF

Explanation

ON: If an error occurs that prevents printing, the message appears on the printer control-panel display, and the printer goes offline for 10 seconds before returning online.

OFF: If an error occurs that prevents printing, the message remains on the printer control-panel display, and the printer

remains offline until you press .

The default setting is ON.

Determines how the printer behaves if the print cartridge is low. Print quality is not guaranteed if you print after receiving this message.

STOP: The printer pauses printing until you replace the print

cartridge or press each time you turn the printer on. The message appears until you replace the print cartridge.

CONTINUE: The printer continues to print, and the message appears until you replace the print cartridge.

The default setting is CONTINUE.

Determines how the printer reacts if the print cartridge is empty.

STOP: The printer stops printing until you replace the print cartridge.

CONTINUE: The printer continues to print, and the REPLACE CARTRIDGE message appears until you replace the print cartridge. HP does not guarantee print quality if you select CONTINUE after a REPLACE CARTRIDGE condition. Replace the print cartridge as soon as possible to ensure good print quality.

If the end of drum life is reached, the printer stops, regardless of the CARTRIDGE OUT setting.

The default setting is CONTINUE.

Determines how the printer behaves if a jam occurs.

AUTO: The printer automatically selects the best mode for printer jam recovery (usually ON).

OFF: The printer does not reprint pages following a jam. Printing performance might be increased with this setting.

ON: The printer automatically reprints pages after a jam is cleared.

The default setting is AUTO.

Determines how the RAM disk is configured.

AUTO: Allows the printer to determine the optimal RAM-disk size based on the amount of available memory.

OFF: The RAM is disabled.

36 Chapter 2 Control panel

ENWW

Page 50
Image 50
HP 5200 manual Values