Repeating image

Dear Mr. Abhjerhjk,

The dhjhfiuhu if teint hhkjhjnf j us a weue jd, fnk ksneh vnk kjdfkaakd ss hsjhnckkajhdhf kashfhnduujdn. Pkshkkhklhlkhkhyufwe4yrh9jjflkln djd skshkshdcnksnjcnal aksnclnslskjlncsl nas lnslna, ncnsljsjscljckn nsnclknsllj hwlsdknls nwljs nlnscl nijhsn clsncij hn. Iosi fsjs jlkh andjna this is a hn. jns fir stie a djakjd ajjssk. Thsi ius vnvlu tyeh lch afted, and when hghj hgjhk jdj a dt sonnleh.

Suolklv jsdj hvjkrt ten sutc of jthjkfjkn vjdj hwjd, an olk d

.at fhjdjht ajshef. Sewlfl nv atug ahgjfjknvr kdkjdh sj hvjk sjskrplo book. Camegajd sand their djnln as orged tyehha as as hf hv of the tinhgh in the cescmdal vlala tojk. Ho sn shj shjkh a sjca kvkjn? No ahdkj ahhtuah ahavjnv hv vh aefve r Tehreh ahkj vaknihidh was skjsaa a dhkjfn anj

cjkhapsldnlj llhfoihrfhthej ahjkkjna oa h j a kah w asj kskjnk as sa fjkank cakajhjkn eanjsdn qa ejhc pjtpvjlnv4purlaxnwl. Ana

l, and the askeina of ahthvnasm. Sayhvjan tjhhjhr ajn ve fh k v nja vkfkahjd a. Smakkljl a sehiah adheufh if you do klakc k w vka ah call lthe cjakha aa d a sd fijs.

Sincerely,

Mr. Scmehnjcj

This type of defect might occur when using preprinted forms or a large quantity of narrow media.

1.Print a few more pages to see if the problem corrects itself.

2.Make sure that type and quality of the media you are using meet HP specifications. (See Paper specifications.)

3.If the distance between defects is 44 mm (1.7 in), 58 mm (2.3 in), or 94 mm (3.7 in), the print cartridge might need to be replaced.

Misformed characters

AaBbCc

AaBbCc

AaBbCc

AaBbCc

AaBbCc

AaBbCc

1.Print a few more pages to see if the problem corrects itself.

2.Make sure that the environmental specifications for the printer are being met. (See Operating environment.)

Page skew

1.Print a few more pages to see if the problem corrects itself.

2.Verify that no torn pieces of media are inside the printer.

3.Make sure that media is loaded correctly and that all adjustments have been made. (See Configuring trays.) Make sure that the guides in the tray are not too tight or too loose against the media.

ENWW

Troubleshooting print-quality problems 159