HP 5200 manual Auto continue, Cartridge low, To set auto continue, To set supplies-low reporting

5.Press or to select the appropriate setting, and then press .

6.Press Menu to exit the menu.

Auto continue

You can determine printer behavior when the system generates an auto-continuable error. ON is the default setting.

●Select ON if you want an error message to appear for 10 seconds before the printer automatically continues to print.

●Select OFF to pause printing any time an error message appears and until you press .

To set auto continue

1.Press Menu to open the menus.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight SYSTEM SETUP, and then press .

4.Press to highlight AUTO CONTINUE, and then press .

5.Press or to select the appropriate setting, and then press .

6.Press Menu to exit the menu.

Cartridge low

The printer has two options for reporting that print-cartridge life is low: CONTINUE is the default value.

●Select CONTINUE to allow the printer to continue printing while a warning appears and until the print cartridge is replaced.

●Select STOP if you want the printer to pause printing until you replace the used print cartridge or press , which allows the printer to print while the warning appears.

To set supplies-low reporting

1.Press Menu to open the menus.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight SYSTEM SETUP, and then press .

4.Press to highlight CARTRIDGE LOW, and then press .

5.Press or to select the appropriate setting, and then press .

6.Press Menu to exit the menu.

ENWW Changing printer-control-panel configuration settings 45