To set the printer default for PS Defer Media

1.Press Menu to open the menus.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight SYSTEM SETUP, and then press .

4.Press to highlight TRAY BEHAVIOR, and then press .

5.Press to select PS DEFER MEDIA.

6.Press or to select ENABLED or DISABLED, and then press .

7.Press Menu to exit the menu.

To set size/type prompt

1.Press Menu to open the menus.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight SYSTEM SETUP, and then press .

4.Press to highlight TRAY BEHAVIOR, and then press .

5.Press to select SIZE/TYPE PROMPT.

6.Press or to select DISPLAY or DO NOT DISPLAY, and then press .

7.Press Menu to exit the menu.

Sleep Delay

The adjustable Sleep Delay feature reduces power consumption when the printer has been inactive for an extended period. Use this menu item to set the length of time before the printer goes into Sleep mode. The default setting is 60 MINUTES.

NOTE The printer control-panel display dims when the printer is in Sleep mode. Sleep mode does not affect printer warm-up time unless the printer was in Sleep mode for more than 8 hours.

To set the Sleep Delay

1.Press Menu to open the menus.

2.Press to highlight CONFIGURE DEVICE, and then press .

3.Press to highlight SYSTEM SETUP, and then press .

4.Press to highlight SLEEP DELAY, and then press .

5.Press or to select the appropriate time period, and then press .

6.Press Menu to exit the menu.

ENWW

Changing printer-control-panel configuration settings

43