InstallingAp plications—Chapter 3
123700Series Color Mobile Computer User’sManual
7Remove the CompactFlash card from your desktop and re install it into
the 700 Color Computer.
8Warm-boot the 700 Color Computer to add these files to the Compact-
Flash storagecard.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on star tup.

Copyingto a Secure Digital Storage Card

1Suspend the 700Color Computer and remove its Secure Digital drive,
which holds a Secure Digitalstorage card.
2Using a Secure DigitalAdapter card, place the Secure Digital drive in
your desktop PC card drive.
3Create a subdirectoryon the PCMCIA Secure Digital drive in which to
store your application.
4Use the CEImager application to add the autorun system to the storage
card. See the Software Tools User’s Manual to learn about CEImager.
5Copy your application, data files, and all requi red DLLs and drivers to
thesubdirectorycreatedontheSecureDigitaldrive.
6Add your application to the AUTOUSER.DAT file on the
“\SDMMC Disk\2577” directory with the following statement:
RUN=\<your directory>\<yourapp.exe>
where your directory is the directory on the Secure Digitalstorage card
where the application was installed, and yourapp.exe isthenameofyour
application. Finish the “RUN=” statement with a carriage retu rn line-
feed combination.There may be multiple run statements in the file.
7Remove the Secure Digitalcard from your desktop and reinstall it into
the 700 Color Computer.
8Warm-boot the 700 Color Computer to add these files to the Secure
Digital storage card.
If the AUTOUSER.DAT file is found and the “RUN=” statement is cor-
rect, the task manager launches and executes your program on star tup.
Replicating 700 Color SettingsUsing the Registry
The following informationupdates the registry on your 700 Color Com-
puter, confirms the registry update, then copies the inf ormation onto oth-
er 700 Color Computers in your network.
If you are usingDHCP, no changes are necessary.
If you are using Static IP, the new 700 Color Computer will have th e IP
address of the original700 Color Computer because the copied registry
includes this information.
When you change theIP address using the Intermec Settings applet, the
information is lost when you perform a warm-boot, and th e original IP
address is used.
You must load the REGFLUSH.CAB file before running the Registry Save
application. Once you do, performing a warm-boot keeps the new IP ad-
dress.