NetworkSupport—Chapter 4
141700Series Color Mobile Computer User’sManual
CDMAWA N Monitor - Ge neral CDMAWA N Monitor - De tails
WANMonitor — Details

Below are descriptions and meanings for each piece of infor mation pro-

vided via the Details tab. Most of this is similar to what is shown under

the General tab. Note that the information is listed alphabetically.

ESN Liststhe Electronic SerialNumber (ESN) assigned to this radio module or “Unavailable” if a num-
ber cannot be read fromthe radio. Th is number is required for activation. You must provide this
number to yourservice provider, such as Sprint, Verizon, Bell Mobility, etc., for activation. Note
thatboth the hex version and the decimal version of your ESN is provided.
Firmware Rev Identifiesthe firmware version, if available.
Firmware Type Identifies the typeof firmware installed in the WAN radio module. It should match the carrier
you are using as your network provider.
Hardware Rev Identifiesthe hardware revision of the WAN radiomodule installed in your unit.
IMSI/MIN Shows the IMSI (International MobileSubs criber Identity)number assigned to the Subscriber
IdentityModule (SIM) card installed in this 760 Computer.
Manufacturer Lists the name of the manufacturer that developed this radio module, such as “Sierra Wireless.”
MDN Shows the MDN (Mobile Directory Numb er) or DN (Directory Number) — the number that
identifiesthe account tied to your device. You can consider thisthe “phone number.” Note that
the MDNand IMSI/MIN numbers can be the same.
Model Lists the product name for this radio module, s uch as “Model 72.”
Phone Number Identifiesthe telephone assigned to the WANradio module.
PRI Version Provides the version number of the Pre ferred Roaming List (PRL).
Radio Temp Identifiesthe temperature of the radio module, or lists “Unavailable degrees” if no informationor
temperaturecannotbemeasured.
Rx (abbreviationfor receive) Indicates the number of bytes received over the WANconnection since
the CORE WANModule was started.
Tx (abbreviation for transmit) Indicates the number of bytes receivedover the WAN connection since
the CORE WANModule was started.