TroubleshootingAppendix —B
402 700Series Color MobileComputer User’s Manual
The 700 Color Computer does not respond when connected to a power supply.
Make sure your ac adapter or dock is plugged in and is making good con-
tact with your mobile computer.
The700ColorComputerwillnotturnonwhentheI/Okeyispressed.
The battery may be low and need recharging.
The Power status LED starts blinking.
The Power statusLED provides the status of your battery pack when it is
connected toa charging device. See Chapter 1, “Introduction,” for LED
descriptions.
The 700 Color Computer will not turn on and the screen is blank.
The battery may be critically low. Put your mobile computer ina charger
for at leastfive minutes, remove it from the dock, thenpress the I/O but-
ton. The screen should turn on.
Put your mobile computer back in the charger and continue to charge
your mobilecomputer for at least four hours to make sure thebattery is
fully charged.
The700ColorComputerwillnotturnonwhenplacedinadock.
Make sure the dock is plugged in and your mobile computer is securely
seated in the dock.
The 700 Color Computer shuts down during operation.
You may have a very low battery. Put the battery in a charge r.
The 700 Color Computer does not turn off.
The 700 Color Computer does not turn off wh ile it is processing data. If
this situation continues for a long period of time, i tdoe s run down the
batteryunless you have it connected to an external power, or in a charging
dock.
Should the 700 Color Computer lock up, perform a warm-boot. If the
mobile computer stays locked up, then perform a cold-boot. See Chapter
1, “Introduction,” for information onperforming warm-boots and cold-
boots.
The 700 Color Computer takes a long time to boot up after a warm- or cold-boot
is performed.
Normal recovery timeis 30 to 45 seconds. If the recovery takes longer,
then contact support personnel.