ConfigurableSet tingsAppendix —A
344 700Series Color MobileComputer User’s Manual
Preamble
Sets the preamble that precedes any data you scan with the 700 Color
Computer. Common preambles include a data location number or an op-
erator number.
Action
Tap the Preamble parameter, then enter a preamble value to ch ange this
parameter setting.
SNMPOID
1.3.6.1.4.1.1963.15.3.2.1.1.3.1
Syntax
ADdata
where data is any acceptable values up to 31 ASCII characters. Embedded
null (<NUL>) characters are not allowed. Below arethe non-printing
characters you can use for Virtual Wedge Preambles. Default is blank.
\a Alert (bell)
\b Backspace
\f FormFeed
\n New line/linefeed
\r Carriage return
\t Horizontaltab
\v Vertical tab
\xnnnn nnnn is up to four HEX digits. Use leading zeros to fill out to four digits to
ensureproper conversion. For example, to prependthe character M to
scanned data, set the Preamble to either 1) M, or2) x004D, wh ere 4D is the
HEX equivalent for an uppercase M.