ConfigurableSet tingsAppendix —A
390 700Series Color MobileComputer User’s Manual
ToEnable LEAP with WPA Encryption
1Set 8021x Securityas “LEAP.”
2Set Association to “WPA.” See page 372 for information about WPA
encryption.
3Skip Encryption as it is automatically set to “TKIP.” See page 372 for
more informationabout TKIP.
4EnteryouruniqueUser Name to use this protocol.
5Select Prompt for passwordto hav e the user enter this password each
time to access the protocol, or leave Use following password as selected
to automatically use the protocol without entering a password.