ProgrammingChapter —7
244 700Series Color MobileComputer User’s Manual
IDNATarget
This parameterconfigures the Intermec FTP Server to transmit the IDNA
to a specific destination instead of a general UDP broadcast. Thi s parame-
ter is useful on networks that do not allow UDP broadcasts to be routed
between subnets. The use of this parameter restri ctsth e reception of the
IDNA to the target destination only.
Key HKLM\Software\Intermec\IFTP
Value Type REG_SZ
Valid Range None.
Default None.
ManifestName
This parameterconfigures the Intermec FTP Server to transmit the speci-
fied manifest name in the IDNA. This parameter is used by the Intermec
6920 Communications Server for communication transactions.See the
6920 Communications Server documentationfor proper use of this pa-
rameter.
Key HKLM\Software\Intermec\IFTP
Value Type REG_SZ
Valid Range None.
Default iftp.ini
PauseAtStartup
This parameterconfigures the Intermec FTP Server to sleep for the speci-
fied number of secondsbefore making the FTP service available on the
device.
Key HKLM\Software\Intermec\IFTP
Value Type REG_DWORD- stored in seconds.
Valid Range None.
Default 0
Root
This parameter configures the Inter mec FTP Server to set the root of the
FTP mount pointto the specified value. Note that th is must map to an ex-
isting directory or you will not be able to log into the FTP Server.
Key HKLM\Software\Intermec\IFTP
Value Type REG_SZ
Valid Range None.
Default \