Introduction—Chapter 1
23700Series Color Mobile Computer User’sManual
ForUnits With PSM Build 3.00 or Newer
Do the following to enable the vibrator for the 700 Color Computer . Tap
Start >Settings >theSystem tab>theIntermecSettings icon. Tap the
Device Settings option, tap (+) to expand Beeper, then tap (+) to expand
Vibrate.Select an item, then close this option.
Note: Information about the settings you can configure with the Inter mec
Settings control panel applet is described in the Intermec Computer Com-
mand Reference Manual. The online manual is available from the Intermec
web site at www.intermec.com
Wireless Network Support
Radios are installed at the factory and cannot be installed by a user . The
700 Color Computer must be serviced to install or replace radios. Contact
your Intermec representative for more inf ormation. See Chapter 4, “Net-
work Support” for informationabout supported radios.
Note: Changes or modificationsnot expressly approved by Intermec
TechnologiesCorporation could void the user’s authority to operatethe
equipment.