Introduction—Chapter 1
19700Series Color Mobile Computer User’sManual
Resetting Your 700 Color Computer

Performing a Warm-Boot

Performinga warm-boot may be necessary to correct conditionswhere an
application stops responding to the system. It does, however, unload all
running programs.
Press and hold the I/O key for about ten seconds, then the 700 Color
Computer continuesfrom the screen you were at before you performed
the warm-boot.

Performing a Cold-Boot

In some cases where the 700 Color Computer completely stops respond-
ing, it may be necessaryto perform a cold-boot. Because this may result in
data loss, this procedure is not recommended unless all other r ecovery
methods have failed.
Note: This deletes allprograms and data stored in RAM including the Ob-
ject Store. Make sure data is backedup to your host computer or a storage
card before performing a cold-boot.
1Release the lower clip of the hand strap.
2Remove the battery pack.
3Press the Reset button.
4Reinstall the battery pack.
Reset button Reset button
700Color Computer 730Computer
Thisillust ration shows the back of the 700 Color Computer on th e left and of the 730 Computer on the right .