ConfigurableSet tingsAppendix —A
300 700Series Color MobileComputer User’s Manual
Configuration Parameters
A configuration parameter changes the way the 700 Color Computer op-
erates, such as configuringa parameter to have the 700 Color Computer
emit a very loudbeep in a noisy environment. Use any of the following
methods to execute configuration parameters:
SChange Data Collection and SNMP parameters via control panel ap-
plets laterin this appendix.
SSend parameters from an SNMP management station. See “SNMP Con-
figuration on the 700 Color Computer” starting on page 195.
SScan EasySet bar codes. You can use the EasySet bar code creation soft-
ware from IntermecTechnologies Corporation to print configuration
labels. Scan the labels to change the scanner configuration and data
transfer settings.
Use the Intermec EasySet software to print configuration labels you can
scan to change your configuration settings. For more inf ormation, see
the EasySet online help. EasySet is available from the Intermec Data
Capture web site.

Changinga ParameterSetting

Menus of availableparameters for each group are listed.Use the scroll bars
to go through the list. Expand each menu (+) to view its parame ter set-
tings. Tap aparameter to select, or expand a parameter (+) to view its sub-
parameters.
Note that each parameter or subparameter is shown with its default setting
or current setting in (< >) brackets. Tap a parameter or subparameter to
select that parameter, then do any of the followi ng to change its setting:
Tap Apply to apply any changes. Note that these illustrations are from a
Symbologies parameter.
STypinganewvalueinanentryfield.
SChoosing a new value from the drop-down list.
SSelecting a different option. The selected option contai ns a bullet.
STap Defaults,thenApplyto restor e factory-default settings. Tap Yes
when you are prompted to verify thi s action.