ScannerSupportChapter —6
220 700Series Color MobileComputer User’s Manual
1551Eor 1553 Selected for Scanner Model
When “1551E” or “1553” is selected from the Scannermodel option (see
step 4 above), and the port state is already enabled (see step 5),theprocess
will take several moments to reset. When 1551E or 1553 is successfully
connected duringthis step, the unit will emit some beeps. Here, the termi-
nal is initializing the scanner at 9600 for the baud rate, 7 data bits, even
parity, and 2 stop bitsand synchronizing the terminal’s configuration with
the attached scanner.
With “1551E” or “1553” selected, Symbologies, SymbologyOptions,
Hardware Trigger, and Scanner Port settings are configured from the In-
termec Settings applet. See the the Intermec Computer Command Reference
Manual, availablef romthe Intermec web site at www.intermec.com, for
more information about each enabledoption.
ASCIIS elected for Scanner Model
To send data coming into the 700 Color Computer through th e COM1
port from an external input device, as keyboard data to an applicati on on
the desktop, do the following:
1Select “ASCII” from the Scanner model option.
2Tap to check Enable scanner port.
3Tap File >Save Settings from the bottom of the screen.
With “ASCII”selected, Symbology Options, HardwareTrigger, and Scan-
ner Port settings are configured from the Intermec Settings applet. See the
the Intermec Computer Command Reference Manual,availablefromtheIn-
termec web site at www.intermec.com, for more information about each
enabled option.