ConfigurableSet tingsAppendix —A
328 700Series Color MobileComputer User’s Manual
EAN8 User ID
If “1” was selected in the Symbology ID parameter, you can setyour own
ASCII character to identify EAN-8 bar code data. Note that this is not
available when you use an imager with your 700 Color Computer.
Action: Tap (+) to expand the Symbology ID parameter, select the EAN 8 user
ID parameter,then enter a user ID value to change this parameter setting.
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.8.1
Options: xwhere xis a singleASCII character. Default is \xFF.
EAN13 User ID
If “1” was selected in the Symbology ID parameter, you can setyour own
ASCII character to identifyEAN-13 (European Article Numbering) bar
code data. Note that this is not availablewhen you use an imager with your
700 Color Computer.
Action: Tap (+) to expand the Symbology ID parameter, select the EAN 13 user
ID parameter,then enter a user ID value to change this parameter setting.
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.9.1
Options: xwhere xis a singleASCII character. Default is F.
Matrix2 of 5 User ID
If “1” was selected in the Symbology ID parameter, you can setyour own
ASCII character to identify Matrix 2 of 5 bar code data. Note that this is
not available when you use an imager with your 700 Color Computer.
Action: Tap (+) to expand the Symbology ID parameter, select the Matrix 2 of 5
user ID parameter,then enter a user ID value to change this parameter
setting.
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.24.1
Options: xwhere xis a singleASCII character. Default is D.
TelepenUser ID
If “1” was selected in the Symbology ID parameter, you can setyour own
ASCII character to identify Telepen bar code data. Note that this is not
available when you use an imager with your 700 Color Computer.
Action: Tap (+) to expand the Symbology ID parameter, select the Telepen user
ID parameter,then enter a user ID value to change this parameter setting.
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.4.1.25.1
Options: xwhere xis a singleASCII character. Default is an asterisk (*).