ConfigurableSet tingsAppendix —A
389700Series Color Mobile Computer User’sManual
LEAP(C isco Lightweight EAP)
LEAP is the Cisco Lightweight version of EAP. See page 371 for informa-
tion about EAP.
Use “LEAP” to configure the use of LEAP as an authentication protocol,
select“Open,”“WPA,”or“NetworkEAP”asanassociationmode,oras-
sign Network EAP. Note that this defaults to the Network EAP.
ToEnable LEAP wit h an Open Association
1Set 8021x Securityas “LEAP.”
2Set Association to “Open.”
3Skip Encryption as it is automatically set to“WEP.” See page 372 for
information about WEP encryption.
4EnteryouruniqueUserName to use this protocol.
5Select Prompt for passwordto hav e the user enter this password each
time to access the protocol, or leave Use following password as selected
to automatically use the protocol without entering a password.